The JETMARK I Traverser is a family of short range extend-retract motion controllers designed for inkjet printing on stationary products. The end adapter can accommodate CIJ, HP cartridge or other DOD printers. The unit is available in three stroke lengths 0 - 2", 0 - 4", and 0 - 6". The traverse speed is adjustable from 0 - 8"/sec. The JETMARK I is actuated by any dry contact closure. When activated the controller will provide an 0 - 30 VDC output trigger to the inkjet printer and start the in-out motion. The trigger will be held on until the end of the return stroke. The system comes complete with motion actuator, controller, adjustable mounting stand, 12' trigger cable, and foot switch with a 6' cord.
Unit of Measure

Specifications

AC Voltage Rating

N/A 115 V230 V

Frequency

N/A 50 to 60 Hz

Power Rating

N/A 40 W

Stroke Length

N/A 0 to 2 in0 to 4 in0 to 6 in

Speed

N/A 0 - 8 ”/Sec

Input

N/A Dry Contact

Output

N/A 0 - 30 VDC Open Collector