Item # JETMARK II, JETMARK II Single Axis Motion Marking System On Automation-Plus, Inc.

The JETMARK II Traverser is a family of short range extend-retract motion controllers designed for inkjet printing on stationary products. The end adapter can accommodate CIJ, HP cartridge or other DOD printers. The unit is available stroke lengths of 6 - 15". The traverse speed is adjustable from 0 - 12"/sec. The JETMARK II is actuated by any dry contact closure. When activated the controller will provide an 0 - 30 VDC output trigger to the inkjet printer and start the in-out motion. The trigger will be held on until the end of the return stroke. The system comes complete with motion actuator, controller, adjustable mounting stand, 12' trigger cable, and foot switch with a 6' cord.

Unit of Measure

Specifications

AC Voltage Rating	N/A 115 V230 V
Frequency	N/A 50 to 60 Hz
Power Rating	N/A 120 W
Stroke Length	N/A 6 to 15 in
Speed	N/A 0 - 12 ”/Sec
Input	N/A Dry Contact 0 - 30 VDC (Optional)
Output	N/A Dry Contact (Optional) 0 - 30 VDC Open Collector
Options	N/A Encoder Pulse Output Adjustable Cross Axis Adapters Powered Cross Axis Slides Multi Print Function LCD Operator Interface Additional Inputs And Outputs

Specifications

AC Voltage Rating

Frequency

Power Rating

Stroke Length

Speed

Input

Output

Options