Automation-Plus
Automation-Plus
3409 W. Harry ST.
Wichita, KS 67213
Phone: (316) 946-9988
Fax: (316) 946-0075
Email: sales@automationplus.net
Website: www.automationplus.net
Print Back
The JETMARK I Traverser is a family of short range extend-retract motion controllers designed for inkjet printing on stationary products. The end adapter can accommodate CIJ, HP cartridge or other DOD printers. The unit is available in three stroke lengths 0-2", 0-4", and 0-6". The traverse speed is adjustable from 0-8"/sec. The JETMARK I is actuated by any dry contact closure. When activated the controller will provide an 0-30VDC output trigger to the inkjet printer and start the in-out motion. The trigger will be held on until the end of the return stroke. The system comes complete with motion actuator, controller, adjustable mounting stand, 12' trigger cable, and foot switch with a 6' cord.
JETMARK I Single Axis Motion Marking System
JETMARK I Single Axis Motion Marking System 1
Unit of Measure

View items

Item #

Item Name

Description

AC Voltage Rating

Frequency

Power Rating

Stroke Length

Speed

Input

Output
JETMARK I N/A JETMARK I Single Axis Motion Marking System N/A The JETMARK I Traverser is a family of short range extend-retract motion controllers designed for inkjet printing on stationary products. The end adapter can accommodate CIJ, HP cartridge or other DOD printers. The unit is available in three stroke lengths 0 - 2", 0 - 4", and 0 - 6". The traverse speed is adjustable from 0 - 8"/sec. The JETMARK I is actuated by any dry contact closure. When activated the controller will provide an 0 - 30 VDC output trigger to the inkjet printer and start the in-out motion. The trigger will be held on until the end of the return stroke. The system comes complete with motion actuator, controller, adjustable mounting stand, 12' trigger cable, and foot switch with a 6' cord. N/A 115 V230 V N/A 50 to 60 Hz N/A 40 W N/A 0 to 2 in0 to 4 in0 to 6 in N/A 0 - 8 ”/Sec N/A Dry Contact N/A 0 - 30 VDC Open Collector