The ECM-3000C is a computer controlled marking system capable of marking cylindrical and linear connector products on the same platform. Cylindrical products such as connector bodies or back shells are set on the spindle and rotated while the inkjet printer is triggered. Linear products are positioned on a T-slot table. The print head is rotated 90 degrees with an adapter fitting and is then traversed over the top of the linear device to make the mark. All print head movement and positioning is controlled from the ECS connector marking software. Print head position and rotary speed data are entered on the touch screen or recalled from the database. Message data for the printer can be typed manually, entered with a barcode scanner, or recalled from the database. The computer supplied with the system is a self contained 15 " Touch screen running Windows XPtm.

• Base Sixe 14 X 20"
• Z-axis travel 2.3 "
• Linear-axis travel 4.3"
• 2" 3-Jaw chuck standard
• Spindle 0-1000 RPM
• Power 120 VAC 4 Amps Accessories
• Foot switch
• quick change tool post
• 90 degree adapter
• Printer trigger and com cable