Automation-Plus
Automation-Plus
3409 W. Harry ST.
Wichita, KS 67213
Phone: (316) 946-9988
Fax: (316) 946-0075
Email: sales@automationplus.net
Website: www.automationplus.net
Print Back
The ECM 500L system provides a rotating spindle to mark around the circumference of a product as well as a linear traverse for marking on flat product. Cylindrical products such as connector bodies or back shells are set on the spindle and rotated while the inkjet printer is triggered. Spindle rotation is activated by a foot switch. The print head is positioned using fine pitch screw driven slides and can be set to mark anywhere in a cylindrical area 8 inches in diameter and 6 inches in height. Rotation speed for different radius parts is controlled by a knob on the front panel. A selector switch allows one or two rotations to insure printing does not occur during spindle acceleration or deceleration. For flat part marking the print head holder rotates to 90 degrees around the Z- axis. Parts are placed on the fixture table and when the footswitch is activated the print head traverses over the part.
Unit of Measure

Features

N/A

  • Overall Size 14 X 20 X 14"
  • Linear stroke 0-4 inches
  • Spindle 0-1000 RPM
  • Power 120 VAC 2 Amps

Specifications

Compatible Diameter

 N/A 8 in

Compatible Height

 N/A 6 in

Angle of Rotation

 N/A 0-90 ยบ

Overall Length

 N/A 14 in

Overall Width

 N/A 20 in

Overall Height

 N/A 14 in

Power

 N/A 120 VAC 2 Amps

Linear Stroke

 N/A 0-4 in

Spindle Speed

 N/A 0-1000 rpm

Accessories Included

 N/A 2" 3-Jaw chuck Foot switch Printer trigger cable Quick change tool post Top print adapter